Please ensure Javascript is enabled for purposes of website accessibility

Add-ins


Gas Consumption and Exothermic Reaction Boundary Condition for TEMP/W and CTRAN/W

Gas Consumption and Exothermic Reactions

This Add-In simulates gas consumption due to mineral oxidation (CTRAN/W) and the heat generation (TEMP/W) caused by the associated exothermic reaction.  It is ideal for modeling the oxidation of sulfidic materials in mine wastes that lead to acid mine drainage.

Requires GeoStudio 2018 R2 or newer.

 

Install Add-In

 

 

Related Products

 

 

Add-In Documentation

 

Technical overview (PDF)
Example file illustrating the use of this Add-In (GSZ)

 

How to Install and Use an Add-In

 

This Add-In provides the following functions:

Heat Flux Boundary Condition Functions

First Order Exothermic Heat Flux

Field Name Description SI Units U.S. Customary Units
Heat of Oxidation Conversion factor for energy released per amount of oxygen consumed kJ/Mg ft-lb/slug
 
Reaction Rate vs. Degree of Saturation Functions

Temperature and Concentration Reaction Rate Limits

Field Name Description SI Units U.S. Customary Units
Optimal Reaction Rate   /sec /sec
Temperature Limiting Function Name The name of a modifier function.    
Gas Concentration Limiting Function Name The name of a modifier function for oxygen concentration.    

 

What Is an Add-In?

GeoStudio Add-Ins can be used in place of any internal GeoStudio function (such as those under the Define menu) or SIGMA/W material model.

Some Add-Ins are distributed ready-to-use on the geoslope.com web site or from third parties, but you can also write your own using the Add-In SDK.


Installing this Add-In

Click “Install Add-In” above to download a self-extracting zip file containing the Add-In. The Add-In will be installed in the Add-In folder. By default the Add-In folder is %APPDATA%\GEO-SLOPE\AddIn, but it can be changed in GeoStudio under Edit - Options.

To uninstall the Add-In, simply delete the .dll from the Add-In folder.


Using this Add-In

After installing the Add-In, its functions can be used under Define - Functions in GeoStudio:

  1. From GeoStudio’s Define menu, choose a type of function that this Add-In extends.
  2. Click the Add button to add a new function.
  3. From the “Types” control, select “Add-In Function”.
  4. Click the “Select” button, and select this Add-In from the list.
  5. From the “Functions” control, select one of the functions provided by this Add-In.
  6. Select each “Function Field Name” in turn and type a value.

Understanding Units with Add-Ins

To figure out what units to use when entering values, first determine if your file's Units of Computation are U.S. Customary or SI (see Define - Project Properties - Settings), then use the units indicated in the appropriate column.